The best 47 blower or higher slide in

[Nate The Great]

Well if you and @Jack Zipper Zerkie don't complain about the noise factor at your age, it must be quiet..

 

[Jack Zipper Zerkie]

Well if you and @Jack Zipper Zerkie don't complain about the noise factor at your age, it must be quiet..

Noise = $$$$ Not bad for the small investment. Can't have it all. Great vacuum plenty heat . I have extra mufflers under the van to quiet it. jz

 

[Kenny Hayes]

Well if you and @Jack Zipper Zerkie don't complain about the noise factor at your age, it must be quiet..

I did test is for noise before pulling the trigger. Supposedly Hydramaster won an award for that But, as I told them, what little I’ll run it, I’ll put ear buds in with music
going and all will be well

 

[Mr Brightside]

When I was looking into them back in 2017, they had problems controlling the heat.. Overheating issues..

I’m a simple man, knowing how to fix my own stuff, my location plays a big part in it as well.. I can’t just “drive” my machine over to a dealer and have it taken care of..

ya honestly my 870s heat is amazing but it just seems overpowered so I only run on low and it provides more than enough heat and its very consistent. If I am dual zipper or spinner then I may bump it up but that is it.

What machine is the easiest to work on? I would think a Butler or SteamAction

 

[Nate The Great]

ya honestly my 870s heat is amazing but it just seems overpowered so I only run on low and it provides more than enough heat and its very consistent. If I am dual zipper or spinner then I may bump it up but that is it.

What machine is the easiest to work on? I would think a Butler or SteamAction

The early 870’s issues.. Even the newer ones too but SS taken care of their customers..

I heard the Steam Action Stealth or fighter is easy to work on.. Just ask @Scott S.

 

[steve_64]

I miss my white magic.

 

[hogjowl]

I can’t remember. Why’d you get rid of it?

 

[Chris A]

I'd buy another 370 in a heartbeat.




a 46 is all we need for 150'single wanding.

This may be the route I go if crazy fuel prices stay around

 

[FB7777]

I just bought another Butler today with a build date first week of September

 

[Cleanworks]

I just bought another Butler today with a build date first week of September

Good choice. Max heat/max vac?

 

[FB7777]

You betcha …. Electric reel Mid mount unit in a 2020 Express 2500 with 4000 miles

 

[hogjowl]

Get chip to make your solution like electric

 

[FB7777]

Get chip to make your solution like electric

Or… I could order my new system with one

Electric Pressure Hose Reel - The Butler Corporation

Electric Pressure Hose Reel Aluminum construction with Teflon® bushing glides Located at side or rear door opening Continuously live (remove length of hose required and remainder stays attached on reel) Storage capacity for 200' of high-pressure hose Drag brake allows for tension adjustment...

www.butlersystem.com

 

[Cleanworks]

You betcha …. Electric reel Mid mount unit in a 2020 Express 2500 with 4000 miles

Nice. If I were buying a new machine I would look for a Cleanco or Butler PTO. I may in the near future if my move pans out

 

[Mr Brightside]

Nice. If I were buying a new machine I would look for a Cleanco or Butler PTO. I may in the near future if my move pans out

I bought my first butler 6 months ago and it is nice it has more suction I think than my cds vans and I have the basic blower package

There are some things that I dislike about the butler also but I love the setup and think I can run it for a long time

 

[SamIam]

I just bought another Butler today with a build date first week of September

Yeah like no one saw that coming......


Hahahahah

Congratulations

 

[Nomad74]

The only slide-in Marty has is when he Slides-into his recliner.

 

[steve_64]

I can’t remember. Why’d you get rid of it?

It was a 2002 and needed a new engine Trans and body.
I had the butler already.

 

[hogjowl]

You like your Butler?

 

[steve_64]

I do! But it's not as easy to work out of.
And it has more connections that cause air leaks.
I've had more issues with the 2010 butler than the 02 WM. Van and machine.

 

[Cleanworks]

I do! But it's not as easy to work out of.
And it has more connections that cause air leaks.
I've had more issues with the 2010 butler than the 02 WM. Van and machine.

You want to get rid of any live reels. That's where you can have air leaks. All you need is the vac connection to the waste tank. Don't use their filter box. If you feel you need a filter, use an inline one.

 

[hogjowl]

You have some reason to think that is news to him?

 

[Dolly Llama]

You have some reason to think that is news to him?

with Steveo, one can never know

..L.T.A.

 

[steve_64]

No live reels just a lot of fittings. Way to many imo.

I filter my waste water when I dump.

 

[FB7777]

Too many fittings? Wtf are you babbling about? Air leaks my ass

If you don’t have a live reel then Butler connects 3 inch to the waste tank and you connect off the other inlet

Get off the dope son, your brain is fried

 

[Kenny Hayes]

See, you’re batting .500

 

[FB7777]

See, you’re batting .500

That was off speed, right over the plate

I had to swing

 

[Kenny Hayes]

You’re like a frog and a red worm, you just have to go after it!

 

[FB7777]

There’s way too much bad info on FB

I don’t like seeing it infect here as well

 

[Kenny Hayes]

You and your cousin in Alabama keep that from happening